For the first time, follow the instructions from 1 to 13. This procedure is required for initial use for once.
1. Download and install the Flash tools(version 1.0.2) program on your PC
2. AC power Off in the rear panel or press power button and OK button simultaneously on the front panel. (This is to make Cold Off mode)
3. Connect STB to your PC with USB Cable
4. AC Power On.
5. Press and keep holding the Power button and press + right direction button on the front panel, and you see USB UPGRADE in the front panel display.
6. PC detects new hardware device (important) to INSTALL the USB driver
7. Driver Installation Wizard Appears
8. Select install from a list or specific location (advanced) and click Next.
9. Select Include this location in the search and click Browse
10. Designate the folder at C:/Program files/Flash_tools) and click Next
11. Wizard will search the driver file.
12. Select USB FOR VESTA c:/windows/inf/vestausb.inf and click Next 12.1. If it asks system file in some case, Browse at c:/program files/Flash_tools/vestausb and click OK
13. Click Finish when it is done. Important: The order of this procedure is very important; please do follow the instruction step by step. When Driver is installed successfully, the STB is ready to download the latest image (USB download instructions)
