HowTo use the DGS JTAG flash utility.(adapted from relooker's page on dgs forum)
When the bootloader is corrupted, and there is no way to boot the Relook/Mutant, a JTAG flash can bring your receiver back alive. Here's a description of how to use this program with a 200/300/400s: 1. Get the required files:Get the latest version of Jtag from the download section of the site and install it (eg in c/jtag). Download: 'porttalk22.zip' from http://www.beyondlogic.org. From this package, copy 'AllowIo.exe' into 'c:\jtag' and 'porttalk.sys' into windows\system32\drivers' 2. Connect jtag to parallel port of pcThe pdf file that comes with the jtag program will give you all the settings, etc. Read it first!
For details of how to make your own jtag go to This will also give more detailed information of what is described here. 3. To run the Jtag Program:
Double-click on 'porttalk.reg' to register porttalk. On 400s Type: AllowIo.exe /a Jtag.exe -m Relook400s On 300s Type: AllowIo.exe /a Jtag.exe -m relook300s On 200s Type: AllowIo.exe /a Jtag.exe -m relook200s 4. If all goes well
After running jtag, you will get a message with ' == ' signs indicating the progress. If you haven't quit your windows session and you want to try to flash again, just type: jtag.exe with all the switches. (You don't need to start portatalk because it is already running!) You can now reconnect your box and use usb or serial flash to upload a suitable bootloader (hold power button in on switch on for 400s to get usb upload). You can then flash your image. 5. References
JTag How to on DG Station:
Portatalk program for win32 (windows 200, XP, etc)
|
|||
